Big View Area Auto Darkening Welding Helmet
Description
Auto Darkening welding helmet are designed to protect your eyes and face from sparks, spatter, and harmful radiation under normal welding conditions. Auto-darkening Filter automatically changes from a clear state to a dark state when an arc is struck, and it returns to the clear state when welding stops.
Features
♦ Expert welding helmet
♦ Optical class : 1/1/1/1 or 1/1/1/2
♦ Extra large view sight
♦ Welding& Grinding& Cutting
♦ With standards of CE,ANSI,CSA,AS/NZS
Products details
| MODE | TN350-ADF9120 |
| Optical class | 1/1/1/1 or 1/1/1/2 |
| Filter dimension | 114×133×10mm |
| View size | 98×88mm |
| Light state shade | #3 |
| Dark state shade | Variable Shade DIN5-8/9-13, Internal Knob setting |
| Switching time | 1/25000S from Light to Dark |
| Auto recovery time | 0.2 S-1.0S Fast to Slow, Stepless adjustment |
| Sensitivity control | Low to high, Stepless adjustment |
| Arc sensor | 4 |
| Low TIG Amps Rated | AC/DC TIG, > 5 amps |
| GRINDING function | Yes (#3) |
| Cuntting shade range | Yes (DIN5-8) |
| ADF Self-check | Yes |
| Low batt | Yes (Red LED) |
| UV/IR protection | Up to DIN16 at all time |
| Powered supply | Solar Cells & Replaceable Lithium battery ( CR2450) |
| Power on/off | Full automatic |
| Material | High impact leval, Nylon |
| Operate temp | from -10℃–+55℃ |
| Storing temp | from -20℃–+70℃ |
| Warranty | 2 Years |
| Standard | CE EN175 & EN379, ANSI Z87.1, CSA Z94.3 |
| Application range | Stick Welding (SMAW); TIG DC∾ TIG Pulse DC; TIG Pulse AC; MIG/MAG/CO2; MIG/MAG Pulse; Plasma Arc Cutting (PAC); Plasma Arc Welding (PAW); Grinding. |
| (1) Shell (welding mask) | (8) Plastic nut |
| (2) CR2450 battery | (9) Cartridge locker |
| (3) Welding filter | (10) Sweatband |
| (4) Inside protective lens | (11) Plastic nut |
| (5) LCD locker | (12) Regulator device |
| (6) Out protective lens | (13) Check washer |
| (7) Check nut | (14) Angle adjusting shim |
| (15) Distance sliding vane | (16) Angle check washer |
| (17) Distance sliding vane | (18) Angle adjusting shim |
| (19) Angle adjusting plate |
－We recommend a use for a period of 3 years. The duration of use depends on various factors such as use, cleaning storage and maintenance. Frequently inspections and replacement if it is damaged are recommended.
－A warning that materials which may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals
－A warning that eye-protectors against high speed particles worn over standard ophthalmic spectacles may transmit impacts, thus creating a hazard to the wearer.
－A note to instruct that if protection against high speed particles at extremes of temperature is required then the selected eye-protector should be marked with the letter T immediately after the impact letter, i.e. FT, BT or AT. If the impact letter is not followed by the letter T then the eye protector shall only be used against high speed particles at room temperature.
1. This Auto-Darkening filter welding helmet is not suitable for laser welding & Oxyacetylene welding.
2. Never place this Helmet and Auto-darkening filter on a hot surface.
3. Never open or tamper with the Auto-Darkening Filter.
4.Before operating, please make sure if the function-setting switch set the suitable location “WELDING”/”GRINDING”, or not. This Auto-darkening filter welding helmet will not protect against severe impact hazards.
5. This helmet will not protect against explosive devices or corrosive liquids.
6. Don’t make any modifications to either the filter or helmet, unless specified in this manual. Don’t use replacement parts other than those specified in this manual.
7. Unauthorized modifications and replacement parts will void the warranty and expose the operator to the risk of personal injury.
8. Should this helmet not darken upon striking an arc, stop welding immediately and contact your supervisor or your dealer.
9. Don’t immerse the filter in water.
10. Don’t use any solvents on filters’ screen or helmet components.
11. Use only at temperatures: -5°C ~ + 55°C (23°F ~ 131°F )
12. Storing temperature: – 20°C ~ +70°C (-4 °F ~ 158°F )
13. Protect filter from contacting with liquid and dirt.
14. Clean filters’ surfaces regularly; do not use strong cleaning solutions. Always keep sensors and solar cells clean using a clean lint-free tissue/cloth.
15. Regularly replace the cracked/scratched/pitted front cover lens.
